How to Install Official Stock Firmware on Intex Aqua Secure
Intex Aqua Secure smartphone was launched in May 2016. Here’s the guide about How to Install Stock firmware on Intex Aqua Secure. You can Install the Stock ROM using the SP Flash Tool on your Intex Aqua Secure. By install Stock ROM file for Intex Aqua Secure, Stock Firmware doesn’t void warranty of your smartphone. If your Intex Aqua Secure brick, then you can Unbrick or Fix Bootloop Intex Aqua Secure using Stock Firmware. Download Flash File for Intex Aqua Secure.
Advantage of Install Stock Firmware on Intex Aqua Secure
- Unbrick your Intex Aqua Secure
- Upgrade and Downgrade your Intex Aqua Secure
- Unroot your device
- Fix bugs on your device
- Solve software problems
|Device Name||Intex Aqua Secure|
|Root access||Not Rooted|
– Take complete backup of your device
– Charge your device upto 60%
How to Install Stock Firmware on Intex Aqua Secure using SP Flash Tool
1. Download SP flash tool from above link and extract that file in the destination folder.
2. Install Vcom Driver in your pc from above link. (Install correct driver)
3. Open the folder and you will see flashtool.exe file. Load this tool.
4. When flash tools loads, click on the menu and you will see download tab.
5. You will see the Download Agent and MTK_AllInOneDA.bin.
6. Tap on the Scatter loading menu and load the Stock Rom .zip file. (file name is like MT6xxx_Android_scatter.txt)
7. Now load the above .txt file and click on the download button.
8. Now shutdown your device and Hold Volume Down and Volume Up Buttons together and connect your device with PC/Laptop.
9. When phone connect, the flashing process will start and wait for few minutes to complete it.
10. After few minutes, you will see green button. So the process is completed.
11. Congratulations!! You success fully install Stock ROM on your device.
Congratulations! You successfully Install Stock firmware on Intex Aqua Secure. If you have any problems while Install Stock ROM on Intex Aqua Secure, then comment below.